Description
Casa Fan LCD Touch – Replacement Hunter Remote Control
The LCD Touch from Casa Fan is a nice sleek modern design look remote control pack designed specifically for use with Hunter and being universal can be used on any other brand AC ceiling fan providing that there is sufficient space for the receiver. The pack comprises of both the receiver (which sits in the canopy of the fan or on the cover plate for ultraslim models) and the handset which sits in the wall cradle for safe keeping.
Beware Cheap Remotes – Why pay twice over? The LCD Touch is manufactured in Taiwan by the best specialist remote control producer in the World with a 30 years reputation for excellence, to exacting German standards. The quality design is by leading German ceiling fan company Casa Fan and it has both TUV-SUD and CE approvals. It is specifically designed to resist the regular power surges and voltage spikes that occur in the mains that will blow cheaper Chinese-made receivers to provide a robust and long-lasting service – hence the 2 year warranty that we give – most other retailers only provide 1 year on their remotes. This receiver is designed to be compatible with and will fit all Hunter ceiling fan models apart from the Alchemy. It will also work with most other AC brand ceiling fans although the connector blocks will not be compatible and need to be cut off and an alternative connector used.
Features & Benefits
– 4 speed fan control for Hunter and other brand AC fans in anthracite finish
– Hunter version compatible with all Hunter models apart from Alchemy
– Quick-fit 4-wire snap connector blocks for Hunter, other brands will require connectors
– Contains remote handset transmitter and receiver pack
– German TUV-SUD and CE approvals
– Includes a wall-cradle holder
– 230V-50Hz
– Sleep timer up to 12 hours
– Automatic switch off when leaving room (after 3 mins)
– Maximum motor power load 115 W
– Maximum light load 300 W
– Light dimmer
– Power voltage surge protection – prevents damage from voltage spikes
– Radio frequency works on 434 Mhz range- RF Range 10 metres
– 16 Selectable RF codes (to avoid interference with other devices)
– Takes 4 x AAA 1.5v batteries (included)
– 2 Year warranty (excludes water or physical damage)
– Free UK shipping included (EC shipping £10)
Important Installation Notes
1. Receiver Unit – If you are planning to replace an existing Hunter remote you will need to fit the LCD Touch receiver into the canopy for this to work. There is a standard slot in the ceiling fan canopy for the receiver to go into which is always a tight fit due to limited space and to avoid any vibration from the fan to cause rattling. The handset on it’s own is not compatible with and will not work a Hunter fan receiver.
2. Snap Connectors – The receiver in this pack has the standard Hunter 4-wire electrical snap connector blocks for quick and easy fitting – see image. Ensure that the wires line up according to their colour. This receiver can be used on other makes of AC fan but the fitted blocks will need to be cut off and any good connector blocks used instead. Note that there is no black/white wire from the fan canopy in to the receiver as that is there for the wall control signal only and is not used here since the control signal goes via RF direct to the receiver.
3. Troubleshooting – If your existing remote control no longer works then try replacing the battery first. Then check that you have power going to the receiver unit and when turned on by the remote power coming out of it. If not then the receiver is blown or failed and needs replacing. If it does then there is a problem most likely with the start control capacitors and wire harness or very rarely the motor itself – please contact our office for advice and replacement spares.
4. RF Channel Problems – If the receiver is a new installation then check that the dip-switches on the remote handset match those on the receiver. If you are using other RF remotes in the same room then they might activate the ceiling fan if they are on the same channel. If so then use the dip-switches to select another channel.
5. Reverse Switch – Do not use the slide-switch to put the motor in reverse while the receiver is on as this will damage it.
6. Lamp Flickering/Dimmable Bulbs – If you experience this or a flash when switched off it indicates that you have a non-dimmable OR a cheap Chinese brand bulb installed. Remove and replace with a dimmable one from a reputable brand to avoid damaging the bulb.
Reviews
There are no reviews yet.